Advanced LT for TOYOTA

Enhance your vehicle diagnostics with the Advanced LT plugin for Torque Pro, specifically designed to monitor a wide range of TOYOTA parameters in real-time. This plugin expands the capabilities of Torque Pro by adding advanced sensor data for both engine and automatic transmission systems. You can test the plugin with a limited set of sensors before committing to a purchase, although it does not include calculated sensors like Injector Duty Cycle.

Important Note: While the plugin may work with other TOYOTA models and engines, it has been thoroughly tested on the following:

• Avensis 1.8/2.0 (T270)
• Corolla 1.8/2.0 (E140/E150)
• Corolla 1.6/1.8 (E160/E170)
• Camry 2.4/2.5 (XV40)
• Camry 2.0/2.5 (XV50)
• Highlander 2.7 (XU40)
• Highlander 2.0/2.7 (XU50)
• RAV4 2.0/2.5 (XA30)
• RAV4 2.0/2.5 (XA40)
• Verso 1.6/1.8 (R20)
• Yaris 1.4/1.6 (XP90)
• Yaris 1.3/1.5 (XP130)

The plugin also features an ECU Scanner, which is invaluable for identifying specific sensors on TOYOTA engines not yet covered by the plugin. To utilize this feature, you'll need to record at least 1000 samples and send the logs to the developer for analysis.

To ensure compatibility, Advanced LT requires the most recent version of Torque Pro. It is not a standalone application and will not function without Torque Pro.

Plugin Installation Guide:

1. After purchasing the plugin from Google Play, verify its installation on your Android device.
2. Open Torque Pro and tap on the "Advanced LT" icon.
3. Select the correct engine type, then return to the Torque Pro main screen.
4. Navigate to Torque Pro's "Settings".
5. Confirm the plugin is listed by going to "Settings" > "Plugins" > "Installed Plugins".
6. Scroll to "Manage extra PIDs/Sensors".
7. This section is typically empty unless you've previously added PIDs or custom sensors.
8. From the menu, select "Add predefined set".
9. Choose the appropriate TOYOTA engine type from the list.
10. After selecting, you should see new entries in the Extra PIDs/Sensors list.

Adding Displays:

1. Once you've added the new sensors, go to the Realtime Information/Dashboard.
2. Press the menu key and select "Add Display".
3. Choose the desired display type (Dial, Bar, Graph, Digital Display, etc.).
4. Select the appropriate sensor from the list. Sensors from Advanced LT are prefixed with "[TYDV]" and appear near the top of the list, following the time sensors.

Future updates will include more features and parameters. Your feedback and suggestions are always welcome to help improve the plugin.